MOBILE :
+(91)-9737 042585
Welding
Details :
Welding electrodes. In arc welding an electrode is used to conduct current through a workpiece to fuse two pieces together. Depending upon the process, theelectrode is either consumable, in the case of gas metal arc welding or shielded metal arc welding, or non-consumable, such as in gas tungsten arc welding.
Details :
Welding cable is the electrical conductor for the weldingcurrent. It consists of a series of fine copper strands wrapped inside a non-conductive, durable jacket (typically some type of synthetic or natural rubber of various colors).
Details :
Made using premium quality copper or brass and modern technology, these holders are recognized for their high current conductivity, longer service life and sturdiness. Widely used for both commercial and industrial welding application, our Welding Holder Semi Insulated is suitable for electrode dia up-to 5mm. Furthermore, our clients have the advantage to customize these holders as per their requirements.
Detail :
- For high conductivity of current (copper/brass) body
- Current rating up to 600 amps
- Suitable for electrode dia up to 5 mm
- Open mouth jaw type
- Heat resistant insulators for longer life
- Heavy duty manual arc welding
- For better cable connection 2 allen screws provided with grip plate in fully insulated
Details :
A clamp is a fastening device used to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure.
Details :
The purpose of the regulator is to allow you to control the gas flowing from the tank/cylinder into your beer via the keg. Your gas cylinder contains CO2 at a pressure measured in hundreds of pounds per square inch.
Details :
Oxy-fuel welding and cutting processes require gases at specific pressures, and regulators will generally be used to reduce the high pressures of storage cylinders to those usable for cutting and welding…. The valve assembly has two pressure gauges, one indicating cylinder pressure, the other indicating hose pressure.
Details :
A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output.
Details :
An instrument for measuring the rate of flow of water, gas, or fuel, especially through a pipe…. ‘This paper examines the dependence of whole leaf hydraulic conductance to liquid water (K L) on irradiance when measured with a high pressure flowmeter.’
Details :
Oxy-fuel welding (commonly called oxyacetylene welding, oxy welding, or gas welding in the U.S.) and oxy-fuel cuttingare processes that use fuel gases and oxygen to weld and cut metals, respectively. … In oxy-fuel welding, a weldingtorch is used to weld metals.
Details :
Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
Details :
Tungsten, also known as wolfram, is a chemical element with symbol W and atomic number 74. …Tungsten’s many alloys have numerous applications, including incandescent light bulb filaments, X-ray tubes (as both the filament and target), electrodes in TIG welding, superalloys, and radiation shielding.
Details :
passages which in turn control the precise flame shape. These nozzles provide the optimum conditions for oxy- acetylene welding
+91-9909016714