MOBILE :
+(91)-9737 042585
Lockout Tagout
Detail :
- Ball Valve Lockout
- Standard Model – Small
- For Valves from – 9.5 mm to 31.5 mm (3/8″ to 1¼” )SH-BV-01-ST – width – 75mm x Length – 77mm x Length of Handle – 135mm – 230mm
- Having 9mm hole for Locking
- 7 holes in upper part
- 6 holes in lower part
Detail :
- Lockout Hasp use for Group Locking for the energy source which operated by various Authorized persons
- Only one protective device can accommodate the 6 persons lock to meet Osha’s Lockout/Tagout Standard, 29 CFR &1910.147 & 1910.269
- Material : Mild Stainless steel base with Poly propylene material grip on bottom portion
- Available sizes : Small Jaw – 25mm and Big Jaw – 38mm Diameter
- Parts : 2 same parts joint with rivet in reverse position
- Colour : Red OR any as per customer requirement.
- Dimensions : Jaw Diameter – 25 / 38mm for Big and Small Hasp , Height : 113mmHole Diameter – 10mm
- Weight : 113 gms
Detail :
- Jacket padlock
- With Dielectric ABS body cover
- provision of Differ keys and same keys
- With Small/Long size shackle
- Available colour : Red, Yellow, Blue, Green, Orange, Black, White
- Dimensions :
- Body height : 40mm
- Body width : 42mm
- Body Depth : 19mm
- Shackle Height : 45/23mm
- Shackle Width : 20mm
- Shackle Thickness : 6mm
Detail :
- Lockout Tags
- Printed on 0.5mm Thick Plastic sheet.
- Single / Double colour printing
- Any matter : Do not operate , Do not On, Do not start etc.
- Size : 77 x 138 mm in top cut shape
- Model–SH-T-SC
Detail :
- Multipurpose Cable Lockout
- Best for multiple applications
- PVC molded section for gripping purpose
- Incorporating solid steel die cut insert for holding the Vinyl coated galvanized steel cable.
- Galvanized steel cable withstands more than 100 Kg weight
- Used for Multipurpose group locking
- Route the cable where necessary to lockout the device then feed the cable down the center point at the top.
- When the cable is tight and the source is locked out, squeeze the handle and apply padlock with 2 mtr. cable
- Material composition : ABS and Mild Stainless Steel base internal plate
- Parts : Outer part made of ABS and internal part made of Mild SS with chrome finish having 6 holes for group locking
Detail :
- Cylinder Lockout
- It use to lock the Cylinder top with Cylinder Lockout, just close the upper plates and Lock and Tag out.
- Available colour : Yellow
- Material : PP – Polypropylene
- Weight : 115 gms
- Size : 3.45″x 6.15″
- Upper plates : 2 OR 3 attached with rivets
Details :
Electrical Handle type Lockout for electrical panels- having 4 parts + small lock, one base and insert slotter part made of ABS and steel made long foldable strip having holes for locking arrangement
Detail :
- Universal Circuit Breaker Lockout
- This lockout can easily installed.
- It can use for Single,double,triple and four pole MCB,
- Padlock use to lock this lockout
- Screw Driver Required/ not required
Detail :
- Emergency Push Button lockout/ Electrical Panel Lockout
- Description : Particular device is use to cover the Emergency Push button from any misuse in Indefinite conditions
- Material : Made of special grade transparent material including 2 parts
- Large round shape with provision of cuts to rotate the handle at 45 or 90 degree.
- Size outer square base -95 x 95 mm
- With inner Dia : 75 mm
- Upper part of internal size : dia 80 mm and depth 65 mm
- Material : Poly carbonate
- Colour : transparent Glass
- Weight : 87 gm
+91-9909016714