Lockout Tagout

Valve Lockout Designer
 

Details

  • Ball Valve Lockout
    Standard Model – Small
    For Valves from – 9.5 mm to 31.5 mm (3/8″ to 1¼” )SH-BV-01-ST – width – 75mm x Length – 77mm x Length of Handle – 135mm – 230mm
    Having 9mm hole for Locking
    7 holes in upper part
    6 holes in lower part

 


Download Brochure
 
Safety Lockout Hasp
 

Details

  • Lockout Hasp use for Group Locking for the energy source which operated by various Authorized persons
    Only one protective device can accommodate the 6 persons lock to meet Osha’s Lockout/Tagout Standard, 29 CFR &1910.147 & 1910.269
    Material : Mild Stainless steel base with Poly propylene material grip on bottom portion
    Available sizes : Small Jaw – 25mm and Big Jaw – 38mm Diameter
    Parts : 2 same parts joint with rivet in reverse position
    Colour : Red OR any as per customer requirement.
    Dimensions :Jaw Diameter – 25 / 38mm for Big and Small Hasp , Height : 113mmHole Diameter – 10mm
    Weight : 113 gms

Download Brochure
 
Lockout Padlock
 

 

Details

  • Jacket padlock
    With Dielectric ABS body cover
    provision of Differ keys and same keys
    With Small/Long size shackle
    Available colour : Red, Yellow, Blue, Green, Orange, Black, White
    Dimensions :
    Body height : 40mm
    Body width : 42mm
    Body Depth : 19mm
    Shackle Height : 45/23mm
    Shackle Width : 20mm
    shackle thickness : 6mm

Download Brochure
 
Lockout Tag
 

Details

  • Lockout Tags
    Printed on 0.5mm Thick Plastic sheet.
    Single/ Double colour printing
    Any matter : Do not operate , Do not On, Do not start etc.
    Size : 77 x 138 mm in top cut shape
    Model – SH-T-SC

Download Brochure
 
Cable Lockout
 

 

Details

  • Multipurpose Cable Lockout
    Best for multiple applications
    PVC molded section for gripping purpose
    Incorporating solid steel die cut insert for holding the Vinyl coated galvanized steel cable.
    Galvanized steel cable withstands more than 100 Kg weight
    Used for Multipurpose group locking
    Route the cable where necessary to lockout the device then feed the cable down the center point at the top.
    When the cable is tight and the source is locked out, squeeze the handle and apply padlock with 2 mtr. cable
    Material composition : ABS and Mild Stainless Steel base internal plate
    Parts : Outer part made of ABS and internal part made of Mild SS with chrome finish having 6 holes for group locking

Download Brochure
 
Cylinder Lockout
 

Details

  • Cylinder Lockout
    It use to lock the Cylinder top with Cylinder Lockout , just close the upper plates and Lock and Tag out.
    Available colour – Yellow
    Material – PP – Polypropylene
    Weight – 115 gms
    Size – 3.45″ x 6.15″
    Upper plates – 2 OR 3 attached with rivets

Download Brochure
 
Electrical Lockout Device
 

Details

  • Electrical Handle type Lockout for electrical panels- having 4 parts + small lock , one base and insert slotter part made of ABS and steel made long foldable strip having holes for locking arrangement

Download Brochure
 
Circuit Breaker Lockout
 

Details

  • Universal Circuit Breaker Lockout
    This lockout can easily installed.
    It can use for Single,double,triple and four pole MCB,
    Padlock use to lock this lockout
    Screw Driver Required/ not required

Download Brochure
 
Emergency Push Button Lockout
 

Details

  • Emergency Push Button lockout/ Electrical Panel Lockout
    Description – Particular device is use to cover the Emergency Push button from any misuse in Indefinite conditions
    Material – Made of special grade transparent material including 2 parts
    Large round shape with provision of cuts to rotate the handle at 45 or 90 degree.
    Size outer square base -95 x 95 mm
    With inner Dia -75 mm
    Upper part of internal size -dia 80 mm and depth 65 mm
    Material – Poly carbonate
    Colour : transparent Glass
    Weight – 87 gm

Download Brochure